This website requires JavaScript.
How to Solve the Failure of Baton 3?

How to Solve the Failure of Baton 3?

Aug 20, 2021, 00:00:00
4131

HOW TO SOLVE THE FAILURE OF BATON 3?

Question 1: What charger can be used for Baton 3?

Answer 1: It can be used with bothMCC1A and MCC3. However, there is no difference between using MCC3 and MCC1A in terms of charging rate, for charging with MCC3 is also 1A charging.

 

Question 2: Will Baton 3 fit with CR123A?

Answer 2: Unfortunately, they won’t fit. Please do not put CR123A in Baton 3 and charge it, otherwise there will be a potential risk of explosion.

 

Question 3:What’s the difference between Baton3 and S1RII?

Answer 3: The Baton 3 is the upgraded version of S1R Baton II. It delivers a huge output of 1,200 lumens, a 20% brightness increase. And the throw ups to 166meters, a 14% increase over the S1R Baton II. Moreover, the runtime of Baton 3 increases, when it is compared with S1R Baton II.

 

Question 4:What do I need to pay attention to when I use the wireless charger?

Answer 4:Please do not remove the clip of Baton 3 and put the item into the charging box. Because the design of the box is consistent with the shape of the clip. If the clip is removed, Baton 3 may be put in the wrong way in the charging case and difficult to get it out.

 

Question 5:Can I use wireless charger with S1RII?

Answer 5: S1RII is not compatible with the closing and shutting down function, which cannot be shut down by closing the charging case like Baton 3. It should be shut down instead of turning on when put in the charging case.

 

Question 6:Is the wireless charger waterproof and anti-drop?

Answer 6: The wireless charger isn’t waterproof but 1-meter shockproof.

 

Question 7:The charging case has a built-in 3500mAh battery, and the battery in Baton 3 is 550mah. Why can the charging case only charge baton 3.7 times?

Answer 7: When charging, the battery itself will be worn out, so it can only be charged 3.7 times.

 

Question 8How can I determine how much power is left in the charging case?

Answer 8: There is an indicator light next to the charging port. The green light indicates that the power is more than 60%, the yellow light indicates that there is still 20% - 60% power, the red light indicates that there is still 10% - 20% power. When the red light flashes, it indicates that the power is less than 10%.

olight baton 3 premium edition season

New Edition - Baton 3 Premium Four Season

Olight Baton 3 Kit Red, Orange and Black with 1200 Lumens EDC Rechargeable Torch

HOW TO OPERATE BATON 3 PREMIUM?

  • ON/OFF: Single-click the side switch to turn the light on/off. When the light is turned on, it will return to the previous brightness level selected before the light was turned off.

  • CHANGE BRIGHTNESS LEVEL: When the flashlight is on, press and hold the side switch and it will, starting from the present brightness level, automatically cycle through Low, Medium, and High mode. The mode is selected when the side switch has been released. (Please note: moonlight and turbo are not in the automatic cycle ).

  • MOONLIGHT: When the flashlight is off, press and hold the side switch for over one second to access the moonlight mode.

  • DIRECT ACCESS TO TURBO: Quickly double press the side switch to activate the turbo mode.

  • STROBE: When the flashlight is on, triple-click the side switch to activate strobe mode. To quit this mode, single click or press and hold the switch.

  • TIMER: The Baton 3 has a long (9 minutes) and short (3 minutes) timer when the light needs to be automatically turned off. When the flashlight is on, double click and hold the side switch under the current brightness level to access the timer settings. A single blink accesses the short timer while two blinks accesses the long timer. Then flashlight will automatically turn off when the timer is up. After the timer is set, double click and hold the side switch to shift the timer settings. When the timer is up and the user is about to enter the timer again, the light will return to the last timer setting.

  • LOCKOUT/UNLOCK: When the flashlight is off, press and hold the side switch (for about 2 seconds) to access the button lockout mode (the flashlight will enter the moonlight mode first and will then switch off to signal the lockout mode). Under the lockout mode, press and hold the switch for less than one second without releasing it. The red indicator below the switch will be on for a short time to signal that the light is still in a lockout mode. To unlock it, keep holding switch for over one second until the moonlight mode is on again.


New Arrival | WARRIOR MINI 2 1750 Lumens Compact Tactical EDC Light with Proximity Sensor
Product FAQ for Olight Javelot Turbo Rechargeable LED Torch with 1300 Lumens

Review

0/500

No comment yet

Recommendation

Online customer service

Back to top